To Install the Diagnoz-it Products on your Machine

Complete the Following Steps:

1. Obtain the License key for the Product.
2. Validate and Install the Product.
3. Optional Component
4. Pdf Reader
5. Flash Player
6. Requirement for software
 
Obtain the License key for the Product
 

Go to> Installation CD> Setup1 Folder> SerialKey.exe> Save the file> Send the file to [email protected] or [email protected] or [email protected]

 

1. Insert the Installation CD into your System.  
2. Open the Setup1 Folder from the CD.
3. Double click the SerialKey.exe File it may prompt you. Click on Yes & proceed
3a. Start the process
4. Follow the Instructions till you see the Serial Key Generator Form.
     
5. Copy that Key to any place or Click the Save to file Button.
     
6. Choose the Location to Save the File. This will save the Key in txt format.
     
7. Send this Key to the Vendor so that he may give the suitable Password to you. Send the file to [email protected] or [email protected] or [email protected]

Note: If you have not copied or sent the serial key by typing or SMS, there are fair chances of error, we recommend to send the serial key text file saved on your My Document folder or where you have saved, as it is, as attachment in the email.

     
8. Proceed to next section when you receive the License key.

Be careful to copy & paste the 25 digit password in the appropriate box & save the password for future.

 

Validate and Install the Product

Go to> Installation CD> Setup2 Folder> Install.exe> Enter the 25-digit License Key> Wait> Close>  start using the software

1. Insert the Installation CD into your System.  
2. Open the Setup2 Folder from the CD.
3. Double click the Install.exe File. Click Yes & proceed

4. Follow the Instructions.  
5. Enter the 25-digit License Key provided by the vendor very carefully, when asked.
6. Wait for sometime.
6a. Please click Run Program & proceed
7. Click close button when setup is completed.
    If error message like this appears please reboot your system & try again.
8. To use the product, you can double click the Icon created on your desktop.
8a. If you have deleted the desktop icon, you can start the software from start menu>Nambison's SoftroniX>Diagnoz-it PRO.
9. If problem appears please Right click & Select Properties.
9a. In the properties window:

a. Click on Compatibility tab

b. Click on Run this Program as an admistrator

c. Click apply then OK button.
10. Please click Yes & Proceed
10. On start up the Program will prompt for Username & Password.
By default the
USERNAME: a
PASSWORD: a

User can change it according to his convenience.

 

Optional Component:

 

 

   
1. This software uses pdf files. If you don't have any pdf reader on your system, you can install it from the Installation CD>Utility> Adobe Reader folder.
   
2. This software uses swf files. If you don't have any swf player on your system, you can install it from the Installation CD>Utility> Flash Player folder.
   
3 For recording intra body sounds through Hi-Power DigiScope (Digital Stethoscope), please install from the Installation CD>Utility> Audacity folder.

Note:     Please make sure that your system is free of viruses and your minimum system configuration is:

Hardware Requirement
Processor CPU 1.8 GHz or Above
Memory RAM 256 MB or Above
Free Disk Space HDD 2 GB
Backup Device CD/RW, USB Pen Drive, External Hard disk
Display 1024 X 768 High Color (16 Bit)
Software Requirement
Operating System Microsoft Windows* XP with SP2, Windows* Vista, Windows* 7
Support Software Microsoft .NET Framework v2.0
Windows Installer 3.1
PDF Reader (Any)
SWF Player (Any)
Audacity
 
*Windows is a copyright product of Microsoft Corp. USA

Important Note: Password shall be provided only once for a single purchase.